The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fault code 2-3-2 200

My b230F has problems when cold starting. It hesitates to idle unless I give the speeder a gentle push the first few seconds and thereafter there are no problems.

I have identified the 2-3-2 fault code (fuel system compensating for ruch or lean mixture at idle) and according to the posted messages on the brickboard, the fuel pressure regulator could be defect.

However no fuel pours out of the hole in the front for the vacuum hose when it is removed and the engine is running. However a very weak spell of petrol can be detected from the hole. Furthermore I have tried to connect a petrol hose to the return line and a steady stream of petrol is running out of the hose.

Despite of the aforementioned, can the fuel pressure regulator be defect ?

Could it be that the return line is blocked ?

Any other suggestions ?

malnitz

B.T.W. : The air filter and the fuel filter has been changed recently.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.