The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Distributor problem 120-130

Hi Phil,

I can't find any air leaks so that's one less thing to worry about. I had a look at the needles - they're SM which isn't what I asked for but I think that they rank between KD and DX.

I've set the timing to just under 20 degrees and checked that the advance increases as the revs rise.

I reset the carbs again but there's a misfire across the entire rev range now. I think that I need to spend some time learning how to set the carbs correctly - it wasn't misfiring as badly yesterday. I'll keep at it until I get it right.
I'm new to twin carb setups so I've a bit to learn.

One last question - I mentioned before that the points spark before they're at the top of the cam and therefore well before the rotor meets the cap contact. Is that normal? The gap is set to 40 mm - the dwell angle is 59 degrees which is ok I think.

Thanks again for your help,

Aidan
--
1967 131, 1969 131






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.