The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1994 Volvo 940 Turbo will not start 900 1994

My 940 Turbo was hesitating recently until I picked speed, then seemed to run fine. Finally, as I was making a turn from a stop, it died, and I could not get it started again. I determined that the air induction hose from the mass air sensor in the breather, going to the turbo had worked loose after the clamp slipped off the edge. Repaired the problem, but it still will not start. I have determined that the spark is getting to the plugs, and the injectors are cycling determined by a clicking sound as the system goes through the ignition cycle. I have tried starting fluid sprayed into the induction hose with no success. This problem occurred once before, and starting fluid worked. I know volvos are extremely sensitive to air/fuel mixture. Could the computer be causing my problem; and is there a way to clear the computer control of the ignition/fuel system to allow it to start? Thanks for any advice you can give.

mtf






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.