The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to test the A/C Compressor? Step by Step info needed. 700 1991

First check the pressure.

you can test to see if the compressor works by removing the wiring connector to the pressostat on the accumulator (silver can) next to the firewall in the engine compartment. Put a paperclip in the terminals of the wiring harness, turn on the A/C, and see if the compressor energizes.

If it goes on, remove the paperclip (or whatever) immediately since the compressor shouldn't run without refrigerant because refrigerant carries oil that keeps it lubricated. This tells you that the problem is a low charge (or a defective pressostat, but they rarely fail).

After that, come back and ask around for more information. Chances are, either the system is out of gas, or the control unit on the dashboard is fried. They fail frequently.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.