The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Is there a brake light reset? Or am I missing something? 700

In the process of doing the work you created an imbalance on the brake system- much as would happen if a line ruptured or a caliper seal leaked enough not to build pressure. The brake failure light is to alert you to this type of problem.

The switch for the light is in the brake junction block down below the master cylinder (follow the lines). The "exploded" view of the internals is displayed below.

I have heard that at times a light on after working on the system sometimes rights itself but I do not know how that might be. You should be able to unscrew the large plugs at the ends of the block and carefully push one way or the other and have the light go out because you will have centered the slide portion of the switch. Good luck.

Randy







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.