The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

engine starts and stops 200 1986

My engine has recently developed the following problem on cold starts: it'll start up and run for perhaps a second or two, and then die. A subsequent try and it starts normally. It also hesitates a bit until warmed up. Here's what I've checked/replaced:

1. AMM. Unplugged it and symptoms persist. Checked CO level, also within spec.
2. Coolant temp sensor. Measured resistance at ECU. Within spec.
3. Idle control valve. Measure resistance at terminals. Within spec. Valve not sticking.
4. Fuel relay. Replaced with known good relay - symptoms persist.
5. Fuel regulator. Unplugged vacuum line with engine running - idle picks up, as expected.
6. Checked base idle - 750rpm, normal.
7. Checked/cleaned 25A fuse and its battery connection.

Any other ideas out there?

Thanks,

-dave






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.