The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Changing out speedometer 200 1992

Easy. Pull off the dimmer knob on left, lightly pry off cover plates on right with small screw driver blade (if you have guages there pop off the guage bezels), and lightly pry out dimmer cover plate with small screw driver. Now you will see for philips head screw at each corner of the speedo. Remove them.

There is not much clearance to remove the speedometer over the steering column, so straighten the steering wheel. Now pull out the speedometer enough so that you can reach behind and pull off the wiring connectors. There are three single wires with a tab connectors that can be mistakenly put in the wrong place, so write down there location so you get them back in the right place. The remaining 3 connectors are unique and cannot be put but on their own connectors. Now pull the speedometer out over the steering column until you can slide it to the left or right.

That's it.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.