The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Cam sprocket reomoval 200

I may be a second grader trying to tell the teacher how to spell 'cat', but maybe I can help someone greener than I. I've just done a water pump replacement, timing belt and cam seal. Haynes helped a bit, but I was having trouble loosening the bolt at the cam sprocket. A screwdriver in the hole wasn't helping. I finally used the old belt on the sprocket only and turned the cam until it doubled on itself. Once the belt was nearly fully wrapped on the sprocket, I used a screwdriver through the loop against the head. That held it tight enough to remove the bolt.
Water pump help I can't give. Neither can Haynes.....
I'm now pretty good at removing and reinstalling it except for the seal between the pump and metal heater tube. Silicone and some trimmed red rubber garden hose washers finally did it.
I hope this helps someone....
Mark
--
'94 940 Wagon, '84 240 turbo sedan, '84 245 DL






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.