The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

driveline vibration symptoms 200 1984

It's most likely not any of the items you have listed.You need to do the following before any expensive repairs are tried.


1. Make sure the drive shaft is properly aligned. Both from front
to back but also front half to back half. The drive shaft must
be assembled with the U joints at 90 degrees ofset. Look in any
manual.

2. Check the rear motor mount for wear. If the back of the trans.
is dropping, it will cause the drive shaft to be out of align.
This they do not discuss in the manuals but is VERY important.


3. Finally, check the center carrier for wear.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.