The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

emission woes please advise 200

1986 240 gl well kept when I got it. I can't pass the emission part of inspection.

Scenario: 1st attempt: they would not check emissions b/o exhaust leak. I, the novice saw rust at the rear muffler and changed it.
2nd attempt: standard reading
HC ppm 220 321.54 failed
CO % 1.2 .89 passed
I fixed hole in exhaust pipe with hi-end hi-temp steel bond
standard reading
3rd attempt: HC ppm 220 446.29 failed
CO % 1.2 .54 passed
The pamphlet I was given lists probable causes for hi HC failure as:
"Idle air/fuel mixture too lean,PCV problems,vacuum leaks, EGR System failure, Improper ignition timing, defective spark plug(s), faulty CAT, Defective ignition parts,internal engine problems or equipment malfunctions."

Can anyone give me some insight as to what I should do. The car runs on synthetic oil, flame trap ok,and the car runs as any 240 I have owned.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.