The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1 7/8 inch SU's from 72 Datsun 240z 120-130

Hello, I recently picked up a set of SU carbs from a 1972 Datsun 240z with a 2.4L straight 6. They look to be rebuilt and aren't the flat-top style. They dashpots are held with 3 screws. They have a 1 and 7/8 inch bore and look new compared to my HS6 SUs. With some linkage mods they will bolt right up. If they workout i will port the intakes slightly too match the carbs.

My 64 122s has the original b18 fitted with b20 pistons and a shaved down b20f head ported and polished with bigger valves, hi-ratio rockers, heavier springs, better pushrods, and a race cam fed by the original worn out 1 3/4inch hs6 su carbs with unknown needles. The engine was this way when i purchased the car. It still has the 4 to 1 exhaust, is that bad?

Does anybody have any experience with these carbs?
Are they going to be too big for my motor?
Will low RPM suffer?
Any opinions?

much respect,
curtis m. white
http://thirdchoice.com






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.