The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

vapour lock 444-544

Now temperatures have reached 80ºF over here in the Netherlands, my PV444/B20F demonstrates an annoying vapour lock problem. When I park the car for a few minutes with the hot engine switched off, it will take at least 15-20 minutes before I can drive away again. Cold water on the float chambers does help of course, but I prefer preventing the problem.
I have isolated the fuel hose with a ½” waterhose but that doesn’t help. Between the 2 HIF6 SU’s and the manifold there are phenolic blocks and a heat shield as well (from a 144), but that doesn’t help either. The heat shield is a bit small though. A 82ºC thermostat is mounted and the original fan plus an electric fan is mounted with a 85/75º fan switch in the lower radiator tank, which seems to be adequate for sufficient cooling (the engine does not overheat).
I have run out of ideas how to cure this (except converting to LPG). Who can help?









USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.