The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

'87 240 dl won't start and i need help please!!! 200 1987

Connect a jumper wire from the Left side of fuse 6 to the Left side of fuse 4.
Both Fuel pumps should run immediately. Try starting the engine.

If it starts, the problem is in the Fuel system (bypassed by jumper). Car can be driven with jumper in place, if necessary.

If it still doesn't start, suspect an ignition problem (Ignition failure will automatically prevent Fuel system operation).


Details —
Fuse 6 (Left contact) contact is a voltage source (6—10 are always hot). Fuse cover labeling for #6 is wrong. It's not connected to anything on the '87 LH FI system.
Fuse 4 Left side goes to Main pump, Right side (thru fuse) to Tank pump.
Jumper wire bypasses 25 amp fuse and Fuel relay. Puts voltage where relay would if all was well.
--
Bruce Young
'93 940-NA (current) — 240s (one V8) — 140s — 122s — since '63.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.