The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing trim 200

If you are talking about the rubber trim 2 1/2 to 3 inches wide at the lower part of the doors you can buy trim adheasive from any auto parts store and carefully reglue it into place.If you try to use a double sided foam tape it will not look right. The foam tape will be visible and the trim will protrude too much from the doors.On my 90 240 the trim started to unglue from the front door edge[on the lock side not the hindge side]. I used some trim glue,just poured a little behind the trim and taped it[blue tape] down for a day,this was 2 years ago and still holding. The trim is only available I think from the dealer.Try to glue the trim without removing it from the car.Try to carefully remove any old glue that is on the trim and the door.Clean it well ,then glue it.Good luck,
Nelson






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.