The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tranny dipstick tube install 700

posted by  skim35 on  Mon Aug 23 06:59 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Trying to flush transmission. Pan dropped & reinstalled. But cannot reinstall the transmission dipstick tube (24mm hex nut from side of tranny pan) It appears to be thread alignment issue.

Need to wiggle the dipstick pipe to get it in position, but it is bolted down with the starter motor (18 mm, hex ). Not enough space for a impact wrench (should I invest $ to get smaller impact?) and cannot remove manually (I used 12 pt 18mm socket, should give you about 30' turning space, but dipstick tube is in the way.) Basically I am stuck.

Any idea how to remove this bottom starter motor bolt?

thanks in advance





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.