The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Swapping original Volvo electronic ignition to Pertronix 200 1981

I have an intermittent no-start because of no-spark. I replaced the pickup coil. Everything tests fine with a multi-meter, even when it won't start. I don't want to spend the $ on a new ignition module without knowing that's the problem. I also don't want to spend several hundred $ on an engine wiring harness without knowing that's the problem.

I am thinking about switching to aftermarket ignition. I first saw a Mallory unit on ebay that would use the signal from my original pickup coil and fire the coil, which is all I need. But it went higher than I wanted to pay.

Then I saw this Pertronix gizmo that doesn't even require an ignition box, but there is no application for my 1981 245. So will I have to acquire an older points distributor in order to make a Pertronix electronic ignition work?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.