The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

SU needles 140-160

I found that BAL needles were OK on my B20 (with milled and ported B20F head
and IPD 7001 cam) either with or without filters. K&N are
somewhere in between. Needles are about the last thing you change unless
you have some that are REALLY unsuitable (like for a MUCH bigger or smaller
engine than yours). BTW I am also using HIF6 carbs on a B30 with the same BAL
needles and the big flat air cleaner and they work great there too. Seems to
do about the same with the aircleaner removed.

I'd suggest that you make sure you don't have air leaks and that your mixture
is adjusted right. If the seals on your throttle shafts are old you should
replace them to eliminate a pair of potential air leaks at the worst possible
place on each carb.

Also make sure your float level setting is right and that your float valves
are indeed opening and closing like they are supposed to do.
--
George Downs, Bartlesville, Oklahoma, Central US






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.