The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

K jet no start when hot HELP ME OUT ON THIS 200 1979

On my daughter's '82 KJet we ran into a no-hot start problem. Two wiring connectors were the culprit(s). First one is the connector on the starter solenoid--wiring insulation was shot & crumbling & some shorting was happening when hot, not when cold. Second one was more difficult to find--I was looking for the ingnition ballast resistor, which seems to have disappeared by '82. However, I did find a male/female spade connector pair on a blue wire if I remember correctly located on the passenger side of the engine compartment back near the firewall. Manipulating those connectors really freaked out the engine. Cause was corrosion--cleaned 'em out good with 400 sandpaper, reassembled with a dab of WD40 & no problems since.

Good luck & let us know what you finally find out the culprit is on yours.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.