The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

230FT Fuel injector O-ring replacement 700 1988

230FT Fuel injector O-ring replacement:

With 202K miles on my 230FT I figured it was time to replace the O-rings and have the injectors professionally cleaned. I bought Bosch parts set (part# 1 287 010 704) which contained 3 o-rings, 1 grey support ring and 1 yellow protective sleeve. There were WORKSHOP INSTRUCTIONS included in the kit, which noted that; " The old protective sleeve must not be removed from injection valves with yellow supporting plate."

I have yellow supporting plates on my injectors. Does it mean that I cannot replace the protective sleeve with the new yellow sleeve that came with the kit?

How do I replace the lower O-ring without pulling off the protective sleeve?

I have studied the excellent Brickboard FAQ as well as Mike Ponte's injector cleaning page.

Does anyone have any experience to share

765TIC






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.