The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

non-functioning Lambda system (k=jet) 200 1982

I've been trying to get the lambda system working on my 1982 244 turbo. Right now, the frequency valve buzzes audibly with the oxygen sensor cold or disconnected. Once connected, it quiets down and the dwell drops to around 11 degrees. The O2 sensor reads steady at around .7 volts and does not fluctuate (tested with the o2 sensor still plugged in).

I've tried:
Testing all lambda system wiring per Bentley, checked good
Tested pressure differential switch, and thermal switch, checked good
Tested Freq. valve resistance, read 2.7 ohm, seems good
With O2 sensor disconnected, dwell reading is a normal 43 degrees
Replacing o2 sensor with a new one
Replacing Lambda computer with a junkyard unit

The only possible things I can see that might be wrong are a bad O2 sensor, or a bad computer, which seems unlikely since I've replaced both with to no effect.

I'm stumped.

Any ideas?

--
Eric, 1983 245 ti






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.