The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

how difficult is it to replace an m47 transmission? 200

m47 is the 5spd right? I have done the 4 spd with overdrive, quite easy really. The 5spd is probably lighter and shorter so should be even easier. It will help to get the car nice and high on jackstands if you don't have a lift, and use a trolley jack to supprt it as you pull it back. Consider doing a good clutch inspection while you are in there, although personally I have never burnt out a clutch on a 240. Do take a look for flung oil around the front of the bell housing as this is a sign the rear seal needs doing and this is the time to do it. Careful on the way back in you don't want to bend the shaft. Also on the 240m it helps to loosen the front engine mounts so that the engine rear can lower a bit, this gives you better access to the bellhousing bolts and makes getting the tranny on and of easier. No idea why you posts disappear but there is a place on the site for tech problems under the HELP section.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.