The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Funky valve clearance Part 2 120-130

Hey folks,

as you can read in this thread I had some problems with valve clearance on 1 valve. The gap grew 2 mm in about 80 miles. Because of the extreme growth in valve clearance it made me think it could not be the lifter. (or camlobe since lift was unchanged)

Today I took of the head to have a look, and this is what I found:
The contact surface of the lifter where it meets the pushrod had been completely ‘washed’ away. The pushrod contact surface looked ok, I had also checked that before.

Never seen it before... Check out the difference between left and right lifter (right=wrong). You can clearly see the amount of wear.



I put the engine back together using new lifters, and different pushrods and also changed oil and filter. So far so good…

Cheers, Ben

--
P131, '65, B20B+M47. P131, '69, B20E+AW71L+LSD. (www.tinustechniek.tk)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.