The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Head Changed Now It Won't Start 900 1995

posted by  someone claiming to be nyjahan on  Tue Oct 5 20:46 CST 2004 [RELATED]

Hello To You All,
finely we found a head and replaced it. Also changed timing pulleys and belt. At this time we also decided to open the oil pump in order to change the spring and the piston, in our horror we saw a thick deposits of black gummy oil around the pump wall, which probably was the reason why there was no good circulation of the oil, so we cleaned the channels and replaced the oil pump spring and piston and gaskets. After all this the engine won't fire. Current does not reach the plugs. Current reaches to the camshaft sensor but no signal comes out, but it was good before the timing gave way.
My questions are:
1. Where did we wrong with regard to head and timing change?
2. Is there a way to completely flush the engine passages and pan without dropping the pan?
Thanks.
Regards, nyjahan.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.