The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

New Intake Manifold Gasket -- What Else Should I Do While It's Off 200 1983

given what you posted, i would replace the injectors, holders and orings. the injectors wear out, the seats get beaten to death. 100k is about the limit. if i'm using the old injectors, i break the holder like a walnut to get them off the injectors. pulling them out can be hard because the injector seal gets hard and has no give for the injector to squeeze. i have seen people put the assembly upside down in a vise and pound the injectors out, but i'm leery of the injector tip after that.

you might also get a new oil seperator and install that, too. unless the car has had exemplary service over it's life, the box is slighty clogged and cleaning it with any success is difficult. with the intake off, it's much easier. good luck, chuck.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.