The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

M41 vs solenoid problem 120-130

Yes - there is a switch built into the turn signal lever that was used in other markets to flash the highbeams. In the US it wasn't used, and the wire (attached at the switch) just pokes out of the wiring loom under the hood with a plain unstripped wire end. It gets a momentary ground when ever pulled back. I'm not sure where it emerges from the loom on a 122, on the PV it was on the left hand side of the engine compartment, about 1/2 way between the firewall and the radiator. If I had to choose, I'd pick the headlight dimmer as the best use for it over the OD switch - unless you happen to like the floor mount dimmer.
--
I'm JohnMc, and I approved this message.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.