The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Reply to all... 700


I pulled the stat and the ring loked pinched and damaged. I' yhinking it might have been heat or position based damage, but whatever it was the stat wasn't performing right. The new one I swapped in has been rock steady all day, so I figure the stat was the right call.

As for a compression check, I don't think that would be merited given my symptoms. The temperature is, despite the various positions, fairly stable, and if the gasket had failed I would expect more variation as air entered the cooling system, caused local overheating, and got burped. I would also expect my coolant to be overflowing constantly with the 75kpa cap I have in place, and it hasn't dripped a bit. Going the other way I would only be loosing coolant and seeing white exshaust, neither one of which is the case.

Thanks again to everyone for the input, preciate the help.

Best,
rt






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.