The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cleaned injectors, seems rough on low end 700 1988

My first attempt at cleaning injectors:
1.Put 2.4 volts on contacts and used a Phoenix brake bleeder to inject cleaning fluid through.

2. Put in seal kit from NAPA, $3.99 each.

3.Buttered each o-ring with dow/corning 111 silicone grease. Inj. easily dropped in after manifold holes were cleaned out.

4.I broke the needle tip off on 1 injector but it is still visible.

5.The 88 760 wagon bogs down when starting off until about 20 mph, sounds like a vacuum leak to the distributor. I need to follow it out.

Do I have to get a new injector? Any idea which vacuum line I may have missed.

I have an exhaust leak near the turbo header area which makes a clicking noise. I can't tell from above what is loose.. Could it be a turbo problem?

gary/Ohio 189k 88 760 wagon
lowered-IPD






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.