The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

m40 to m41 gear swap what is involved? 120-130


Thanks all, for the info on the gear oil , sounds like the SAE30 is the way to go.

I have been thinking the idea over of rebuilding the transmission next year.
I was considering taking the M41 apart, obtaining new bearings and synchro rings and using whatever parts I can from a less worn M40.

I have a second M41,well the back half of it, the case is snapped off, 9 owner used overdrive in reverse by accident, or so i was told. and the mainshaft is gone, but the od clutch parts may be intact. i only have the one long mainshaft and it is in my car.

the tranny still shifts ok , just getting a little noisy. has anyone else tried this? and will most everything swap over, less the longer mainshaft?
it seems it isn't hard to find good M40's for the parts, but the M41's are harder to find. If all the gears and bearings can be swapped over it might make it easier to finish up with a half decent one without going for broke.

phil








USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.