The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Yikes!! Wiring troubles. 200 1982

I'm sure many of you have been through this before but here's my story. Last Thursday morning the upper heater hose split just under the intake manifold. Lots of steam but got her home before all of the coolant was gone. Never went over 3/4 on the temp gauge (whew)

On Sunday morning I grabbed some 5/8" hose and went at it! (I'll get the proper hose ASAP, just a bodge with the straight hose so I can use the car Monday morning)

As I was moving things out of the way to get under there (what a nasty place to reach BTW) I attempted to unplug the engine wiring harness. You folks that have been around 80s bricks know what I found!!



Luckily I had some shrinkwrap and there was good insulation below the mess. Here's the finished job.



I think I'm going to pull the adhesive electrical tape off and do a better job of sealing things up as soon as I get a chance.

Where else should I look for damage?

Mark.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.