The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Parking brake pads too big. 200

When I put the new ebrake pads on I couldn't get the new rotors on so I got the old grinder out and modified them a little. There was no adjuster star on them. Just that two piece mechanism on the bottom at the end of the cable and the forked bar at the top. I loosened the cables as much as I could and I could see that there was no more space for the pads to fit. It certainly seemed like they had to be modified. I deepened the spaces where they go up against the bar and mechanism. Finally got the rotors on and adjusted the cables back up.
Also changed all the calipers and bads.
So now, of course, the emergency brake doesn't work at all. I assume the pads are not reaching the inside of the rotor because of my mods.
What gives? Why wouldn't the rotors go back on (before the mods) when the pads were on and there was no more space for them?
Has anyone ever had this problem?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.