The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Please not a headgasket 700 1989

It wouldnt hurt any, i just picked up a complete refurb head off Ebay for $250 including shipping, valves were redone the whole shabang, i just needed to add the front seal., i would do a valve job on any head i put on if i plan on running the car for more then 50K with the head i put on, I believe it cost's more to have your own head machined so if you can find a deal like i did go for it. i typicly dont have the cash to hand over for head machining and have done just normall head swap's until i picked up that head from ebay, i have yet to ever have any problem's but as always the recomendations for sanding and machining have good merit as you could increase your chance of having a problem if you dont, its all up to the person doing it and if you can afforde to what is recomended.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.