The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Mixed clutch bits 120-130

posted by  SebCH on  Tue Nov 16 08:43 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Feb 19 06:25 CST 2010
[RELATED]

Hi all,
I come back to you after getting the responses to my original question abotu clutch cylinders, sychro problems which got a few (hard to hear) answers. Several of you think my 3rd/4th synchros must have gone somewhere into the Amazon's paradise.

I'm not at this point ready for a rebuilt of the gearbox (no tools and no know-how at hand) so I first want to make sure all the other possible problems are solved. I believed that a mismatch between slave-cylinder, clutch release bearing and clutch mechanism could lead to a sticking clutch that would not allow the box to shift smoothely.

Since I will pull the motor anyway, I'd like to make sure I have the right setup: I have several mechanisms at hand:
http://img25.exs.cx/img25/9115/PICT0084small.jpg
http://img25.exs.cx/img25/9643/PICT0083small.jpg
http://img25.exs.cx/img25/1/PICT0082small.jpg
The release bearing I recently purchased is the following:
http://img129.exs.cx/img129/254/70_1_b.jpg

I believe there is only one model of master cylinder, whereas there are two of slave cylinder. I have both of the latter in stock.
Which setup should I chose to gon onto a B20 (6 bolts flywheel)?

THanks for your help and sorry for the non clickable links: anyway to turn them into proper hyperlinks?
Cheers! Séb






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.