The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

problem solved 140-160

I finally screwed up my courage and decided to take the 75 B20 distributor apart. The shaft had become so hard to turn that I was afraid it might seize and cause major damage to the distributor. So I unscrewed all the screws, constantly reminding myself that this is a very rare part, and it would lift my 144 out of the points and condensor rut. Turns out the upper shaft (where the rotor sits) is rusted and seized and takes alot of effort to turn. Bottom half was OK. I took the opportunity to lube the bottom shaft up. Quick trip to the bone yard, and managed to get the top half from an 80 240. Bolts in perfectly, and the hardest part was getting the springs back in. Everything is back together, and the distributor shaft now spins effortlessly like as if its magnetically levitated!
--
...and the bricks keep on rolling






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.