The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Changing Rear Brake Rotors 200 2003

Hey ya'll, I'm trying to replace the rear brake rotors on my 93 240 wagon.
I've done the front brakes and new rotors, no problema. Also replaced the rear pads, but there's a vibration coming from the rear. Last night got the calipers off, but couldn't shake the rotor loose. Any ideas? I've got the Haines book - they mention backing off the e-brake adjustment screw, but I don't think my car has that (couldn't see it) Btw - everybody says hang the calipers on a wire, but I've got rigid tubing that won't bend that far. It was actually pretty easy to disconnect the brake line. The secret is to put a piece of plastic bag under the brake fluid filler cap to reduce brake fluid loss down to 1-2 drips, and re-connect the brake line before re-mounting the caliper to allow easier alignment of the fitting in the caliper. I'm up to about 3 sets of front rotors on 3 wagons, but never had to do the rear until now!
Thanks in advance.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.