The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cold start valve wiring 700 1990

posted by  John745 on  Fri Dec 3 17:27 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hello, I have recently have had a reoccuring problem with my check engine light coming on. Through this site I have learned a great amount about my car. The OBD code will flash 3-2-1 cold start valve. I finally broke down after many attempts at trying to figure this out and went ahead to replace the valve. When I unclipped the wiring from the injector a green-red wire came out of the harness and was not attached to anything. A blue-green wire runs from the injector to the starter coil, and is energized when the starter is engaged. The stray wire is live 10V. when the ingition is on. Should I hook this wire to the injector? If so, how? Thanks for any replies. John745.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.