The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Greasing sealed 960 front wheel bearing. 900

the bearing i regreased felt OK before i attemped this,but i figured i had nothing to lose by experimenting.i aquired the strut housing primarily to swap since the original 215k bearing felt that it was starting to fail.from everything i've read in the past indicates the bearings will be ruined and fall apart during removal,this was not the case.
when i put the replacement strut housing on it was apparent that the stub was not in line with the strut tube,i had a bad camber issue.there was no gap between the strut and the tire so i had to put the original back on.dont you just love doing a job twice?that's when i decided to experiment with the bearing.i was surprised that both bearings came off so smoothly after removing the nut.
--
92-965-204k, 94-965-211k, 92-944t-200k, 83-242dl,totaled(8/04), 84-242GLT,totaled(2/03),83-245GLT,retired(03)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.