The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Front bumper shocks 200 1988

Hold on there, partner. before you go and buy a new one, try what I did. Remove the bumper and shocks from the car. If you can get the offending shock off the bumper, all the better. If so, put the bracket on the larger end in a bench vise. Take the largest set of channel lock pliers you have and wrap them around the smaller piston and slowly twist and pull. The twist should only be about 1/8th of a turn, max, in any direction. The piston should pop back into position, and you've saved yourself a chunk of change. If the shock doesn't come off the bumper, as they often don't, chock the bumper so it doesn't wiggle, and pull and twist in place....same results. DO NOT USE HEAT! I've done this trick on my Volvo, later Porsche 914, and other vehicles. Saved a ton of $.

Brad






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.