The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

rear bumper cover distorting 200 1992

I couldn't find anything about it in the archives, but someone else out there must have experienced this:

The plastic cover over the rear bumper on my '92 245 has become distorted so that there are slight bulges on the top of the bumper. Aesthetically it's not the end of the world, but the bulges are pushing the bumper trim against the tailgate, causing scratching on its bottom edge. Consequently, rust is creeping up the back of the tailgate from that spot.

I've seen rust on other 245s in the same spot (driver's side mostly), so I'm thinking it's a common condition.

My guess is that the bumper is corroding under the plastic cover and that's causing the disortion, but taking the cover off is kindof a PITA so I was hoping for advice before I did so...

Any information on the subject would be appreciated.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.