The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Dewfpo---oil separator question S90-V90

I think your description of the upper doughnut application is incorrect. I just put a new oil trap box on my car while I was doing the head gasket. The flat face seemed to fit inside the recess on the block while the box's features seemed to fit the recessed part best.

I chose to put the lower "pipe" on the box first and then the flanged end went against the engine. Here I don't think there is a great difference. I didn't use sealer and so far there are no leaks.

I had forgotten that I had bought seals a long time ago and found the old design parts after I was organizing after the gasket job. The new parts, (green upper seal and rubber flanged part with the metal support) seem like they will work much better. Besides, tightening those clamps even with the intake manifold out of the way would be a "b@#ch".
--
'96 965 with 16' wheels at 121K. Had '85 745 Turbo Diesel for 200K.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.