The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Am I going to blow up? 700

Hi all, well I just put the fuel pump (rear pre-pump) assembly back in. That was fun. I spent three hours in the trunk of my car...good thing I am small. ANyway, when I took the assembly out, I broke off the ground attachment that secures by all the inlet hoses on the top of the brass/steel lid. To remedy the problem, I drilled a hole through the lid and used a nut and bold to make a ground rod. Then I cut the old ground and crimped and "i" to it and secured that to the top of the lid. I put caulking around the nut (which was already pretty air tight) so no pressure would escape from the tank..in case that was important. Is it safe to have the head of a bold on the underside of the steel lid as a ground. I didnt think it would matter since it was grounded to the lid anyway. I am nervous to try it. Please help, Joe.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.