The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Why is the metal part in the spark plug wire eaten away? 200 1990

posted by  someone claiming to be VolVolina on  Sun Jan 16 03:00 CST 2005 [RELATED]

It's a 1990 244DL.

So I pulled off the plug wires from the dist cap. Two of the four wires seem to have the metal part half eaten away! It's like the metal was vaporized! Why or how did this happen? They were the Maganacore from IPD.

On another note - I went to advance to get a replacement set of wires. The set didn't fit. It had this metal jacket on it. The metal prevented it from getting all the way down over the plugs. So I thought if I took off the metal it would fit. It then wouldn't snap over the plugs! It's like the nipple on the plugs is different from the recepticle on the wires. Why is this? Can Advance be wrong? They double checked the part number. I'm heading back today to exchange them for a different brand and if those don't fit I'll head off to NAPA.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.