The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Head off... now what all should I replace at 200k miles? 700

Since the others are targeting the engine area I'll point you to the odd ball stuff people never think of until it breaks. Front wheel bearings, new brushes and voltage regulator unit for the alternator. If you have not replaced it do it now the radiator, over flow bottle and the heater control valve. The plastic gets brittle over time and snaps at the wrong time. If you have the money and time replace all the bushings front and rear. With 200k the bushings are shot and should be replaced. This will tighten up the car a lot and make the fun to drive factor go up. BTW I changed the rear wheel bearings at 300K on mine. When I pulled the wheels for the front bearings they were close to shot and the brushes were almost gone in the alternator at 200K.

1987 745T M46 318,500 miles
SAAB APC Boost control 14 psi
Bilstein HD's, lowered,
U&L Chassis braces
25 mm sways and Hydras






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.