The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to replace the heater hoses.. 200 1986

Ok, its not really that bad

One heater hose goes under the intake manifold and the clamp can be accessed between #3 and #4 intake runners.

The other runs to a metal tube that goes from the water pump and which terminates behind the motor. You'll need a flat screwdriver of decent length to get at the clamp, or a nut driver. Pulling this hose of that metal tube could be a challenge, and I would suggest cutting a slit lenghtwise along it and "peeling" it off.

Cut of the hose where they attach at the firewall too. It makes it much easier.

Autozone usually stocks both hoses. However, one hose on my '85 was a zig zag and the auto zone one just had one bend. It will still work fine. Also, don't be afraid to cut a little of the hoses, as they might be cut to fit and thus too long. Do not try to use non formed hose, it doesn't work well, the bends are too sharp.

Thats about it.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.