The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Dash pad glue 120-130

posted by  someone claiming to be mike on  Mon Jan 24 11:18 CST 2005 [RELATED]

WHY GLUE AT ALL? I HAVE PREFORMED THIS OPERATION MANY OF TIMES IN THE PAST AND NEVER USED ANY GLUE..WITH THE INSIDE WINDSHIELD MOLDING AND SCREWS UNDER THE MOLDING THERE IS PLENTY OF HOLDING POWER TO KEEP THE DASH IN PLACE.AS FOR THE FRONT , THE CHROME MOLDING THAT RUNS IN FRONT OF THE DASH WILL HOLD THE PAD DOWN.REMEMBER THE SCREWS WHICH HOLD THE MOLDING IN PLACE,TIME AFTER TIME I SEE THESE MOLDING BENT-UP BECAUSE FOLKS PULL THEM OFF WITHOUT REMOVING THE TWO SCREWS FIRST..AFTER THE DASH IS COMPLETLY INSTALLED THE REMAINING PLASTIC UNDER THE FRONT MOLDING CAN BE TRIMED WITH A RAZOR TO GIVE YOU A PROFESSIONAL JOB...






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.