The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

I tackled my cold start problem and failed

posted by  johhnyb on  Fri Feb 4 07:51 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hello all,

Recently replaced the Fuel Pressure Regulator and ECT and changed seals on my injectors on my b230f won't start at all, even on this balmy 40 degree day when it would usually start no trouble. A couple of questions since I am learning.

1)There is gas in the oil I can smell it pretty good, could this be causing the no start.

2)on the injectors when i removed them they didn't have the protective caps on them but the seal kits included the caps so I put the yellow caps on does tis matter?

3)Did the injectors have replaced in the same order, i was careful to make sure the wires were connected in the same order.

Thanks, John






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.