The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Did volvo make a snap-in wiring harness for towing? 200

I made one.

I used 3 relays to feed power to the appropriate trailer harness wires. The relays get their power from the heavy gauge 12V line I have going to the trunk to feed the power amp. They are triggered by the brake, or tail, or turn signal circuits. This avoids overstressing those circuits and the relay coils don't draw enough current to trigger the BFS.

Cost was maybe $20 including the 4-pin trailer plug and wiring. I get Bosch 12V, SPDT relays from Parts Express at about $2 ea. Sockets for these are another $1.50.

http://www.partsexpress.com/webpage.cfm?webpage_id=3&SO=2&DID=7&CATID=47&ObjectGroup_ID=31

--
Bob (son's 81-244GL B21F, dtr's 83-244DL B23F, 'my' 94-944 B230FD; plus grocery-getter Dodge minivan, hobbycar 77 MGB, and a few old motorcycles)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.