The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Regardless of lubricant 200

Okay. I re-read your original question and it's evident you are looking for a short cut. Nothing wrong with that.
I wouldn't think you can remove just the rack even after removing the right hand inner TR end because you would run out of teeth on the rack. The pinion would prevent you from moving the rack any further to the left. But maybe if you removed the front cover and took out the pre-load piston you could withdraw the rack. Probably pull the rack bushing off of the other end too just for wiggle room. I'm not going to say you should or shouldn't. Just that it sounds possible. You would then also have a straight shot at the pinion gear for cleaning. But I would not just put it back together without observing the procedures in the manual with regard to piston clearance and pinion torque.
--
'80 DL 2 door






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.