The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Mistake in 700/900 FAQ? - water pump bolt torque numbers 900 1994

My waterpump was weeping from the top seal, so I removed it and replaced all seals. I checked the FAQ to make sure I wasn't skipping anything. Steps 13 and 14 under the water pump section: http://www.brickboard.com/FAQ/700-900/Cooling.htm#Water_Pump says to torque the bolts and nuts to 11-15 ft-lbs. My torque wrench is calibrated in in-lbs and Nenwton-meters, so I converted 13 ft-lbs to 17 N*m, and promptly stripped threads and stretched bolts. The bolts and studs on my car are M6, and their torque limit according to http://www.boltdepot.com/fastener-information/Metric-Recommended-Torque.aspx is 12 N*m. Is this an error in the instructions? Should it say 11-15 N*m instead?
--
Jim Egelston - Seattle - '81 245DL, '85 244GL, '94 945T, '89 535i, '74 R90S






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.