The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine Wiring Harness for 1981 B21A Done! 200 1981

posted by  RLC on  Fri Mar 11 19:52 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I started Friday afternoon and finished Saturday afternoon. I believe I have a better harness than Factory original. I previously made a wiring diagram. I laid the factory original alongside my harness, to be sure it was 100% the same length wires, etc. I used OEM Volvo Wire appropriate color codes and black plastic sleeves from the interior of various Wrecks. The stuff is fresh and nice. I wrapped all wires that would be next to the engine in Al foil, then put the sleeve over it. I sealed the ends with Heat Shrink Tubing to prevent water, road grime, fuel, oil, etc. from getting in there. I used 6 90 degree connectors for strain relief. I soldered and crimped all connectors.
I am well satisfied.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.