The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

D24T Diesel, Valve stem to guide clearance 700

Hi all

I'm into the head now on my diesel rebuild. I'd like to get some advice on Valve Stem to Guide clearance.

The Volvo Green book procedure is to hold the valve open. The stem flush with the end of the guide and measure the side to side clearance with a Dial Indicator. Anything over .0511" is excessive. This seems like alot. I've worked on gassers with much less play than this. I've heard of errors with the Green Book. I'm wondering if this is one?

In any case, I have .042" Exhaust and .023" Intake (Highest reading, but pretty consistant.)

What would you guys do? Leave it alone or replace the guides. I haven't the facilities to press out guides so I'd have to send it out.

I'm leaning towards leaving it alone due to the fact that every valve has a positive Valve Stem seal that is getting replaced.

Thanks again






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.